Sony DVP-FX740DT - Manual (Page 30)

30
ENTER on the player. If you perform
this operation, some settings may return
to their original factory settings.
Hookup
There is no picture or sound on the
connected equipment.
, Re-connect the connecting cord securely
(page 11).
, The connecting cord is damaged.
, Check the setting of a connected TV or
amplifier.
, When “USB” is displayed, press INPUT
and select “Disc” (page 7).
USB
The player does not recognize a USB
device connected to the player.
, Re-connect the USB device securely
(page 16).
, The USB device is damaged.
, Press INPUT to select “USB” (page 16).
TV
There is no picture for digital TV
programmes.
, Re-connect the aerial cable securely.
, The connecting cable is damaged.
, Channel is used only for data (no picture
or no sound).
, A scrambled channel is selected.
, Digital text service is not supported.
The channel is not found or stored or
missed.
, Make sure that your aerial is properly
connected to the player.
, Check your aerial installation.
, Data service is not supported.
, Inactive channels cannot be received.
The picture is breaking up.
, The signal strength is low.
, Check your aerial installation.
There is no picture using the supplied
aerial.
, Check for reception strength.
, Adjust the direction of the aerial.
, Check that the region you are in has
DVB-T broadcasts or not.
, In a DVB-T broadcast region reception
may be difficult in the following places:
- A heavily built up area
- In an underground location, such as a
subway or basement