Sharp LL-T1803-H - Manual (Page 24)

24
Specifications
The analog signal input connector pin
(Mini D-sub connector with 15 pins)
5 1 2 3 4
10 6 7 8 9
15 11 12 13 14
The DVI-D input connector pin
(DVI-D connector with 24 pins)
1 7 6 5 4 3 2 8
9 15 14 13 12 11 10 16
17 23 22 21 20 19 18 24
Power management
The monitor is based on the VESA DPMS* 1 and the
DVI DMPM* 2 standards.
To activate the monitor's Power Management func-
tion, both the video card and the computer must
conform to the VESA DPMS standard and the DVI
DMPM standard.
* 1 DPMS: Display Power Management Signalling
* 2 DMPM: Digital Monitor Power Management
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers informa-
tion such as degree of resolution between the moni-
tor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect
the Plug & Play monitor.
There are many varieties of DDC due to the differ-
ences between systems. This monitor works with
DDC1 and DDC2B.
Number Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 DDC+5V
10 N.C.
11 GND
12 DDC data
13 For Hsync signal input
14 For Vsync signal input
15 DDC clock
No. Function No. Function
1 TMDS data 2- 13 N.C.
2 TMDS data 2+ 14 +5V
3 TMDS data 2/4 shield 15 GND
4 N.C. 16 Hot plug detection
5 N.C. 17 TMDS data 0-
6 DDC clock 18 TMDS data 0+
7 DDC data 19 TMDS data 0/5 shield
8 N.C. 20 N.C.
9 TMDS data 1- 21 N.C.
10 TMDS data 1+ 22 TMDS clock shield
11 TMDS data 1/3 shield 23 TMDS clock +
12 N.C. 24 TMDS clock -
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 49W Yes Yes
STANDBY No Yes
SUSPEND Display off 3.5W Yes No
OFF No No
DMPM mode Screen Power
consumption
ON Display on 49W
OFF Display off 3.5W