Sony 4-166-309-11(1) - Manual (Page 42)

ICD-PX820
4-166-309-11(1)
E:\Voce-P\4166309111\4166309111ICDPX820CE7\01GB-ICDPX820CE7\060PLY.fm
Master: Left
42 GB
3
Set the alarm date and time.
1 Press – . or > + to select
“DATE,” a day of the week, or
“DAILY,” and then press
N PLAY/
STOP•ENTER.
2 When you select “DATE”:
Set the year, month, day, hour, and
minute in sequence, as described in
“Step 4: Setting the Clock” on
page 12, and then press
N PLAY/
STOP•ENTER.
When you select a day of the week
or “DAILY”:
Press –
. or > + to set the hour,
and then press N PLAY/
STOP•ENTER, press – . or > +
to set the minute, and then press
N PLAY/STOP•ENTER.
4
Press – . or > + to select the alarm
sound either from “B-PLAY,” “BEEP”
or “PLAY,” and then press
N PLAY/
STOP•ENTER.
“ALARM ON” will be displayed.
5
Press x (stop) to exit the menu mode.
The setting process is finished and “ , ”
(alarm indicator) appears in the display
window.
To change the alarm setting
Start from step 2 on page 41.
To cancel the alarm setting
Follow steps 1 and 2- 3 on page 41. In step
2- 3 , press – . or > + to select “OFF,”
and then press N PLAY/STOP•ENTER.
The alarm will be cancelled and the alarm
indicator will disappear from the display
window.
When the set date and time
comes
At the set time, the alarm will sound for
about 10 seconds and the selected message
will be played back. (If you have selected
“BEEP,” only the alarm will sound. If you
have selected “PLAY,” only the selected
message will be played back.)
During playback, “ALARM” will flash in
the display window.
If you have selected “B-PLAY” or
“PLAY,” the IC recorder will stop
B-PLAY The selected message will be
played back after the alarm.
BEEP Only the alarm will sound.
PLAY Only the selected message will
be played back.