Sharp DV-RW550U - Manual (Page 42)

42
Recording
Dubbing Mode
You can copy a DVD disc to a
videotape or copy a videotape to a
DVD disc.This function will be pos-
sible only if the DVD disc or the
videotape is not copy protected.
Before starting this function, pre-
pare for the recording on the
DVD-RW/-R disc or the videotape.
Refer to pages 32-33, 95.
Make sure:
• Insert a recordable disc and a
videotape with an erase-protec-
tion tab.
Note for recording to a
videotape:
• The videotape's erase-protection
tab is intact.
• The remaining time of the video-
tape is long enough.
Note for recording to a disc:
• Make sure that the disc is
recordable. Refer to pages 26-27.
1
Press SETUP to display set-
ting menu.
Easy Setting Menu or Advanced
Setting Menu will appear.
If Advanced Setting Menu is dis-
played, proceed to STEP 3.
2
Select “Advanced Setting
Menu” using Cursor K / L,
then press ENTER.
Advanced Setting Menu will appear.
3
Select “Recording” using
Cursor K / L, then press
ENTER.
Recording menu will appear.
4
Select “Dubbing Mode” using
Cursor K / L, then press
ENTER.
Option window will appear.
Dubbing Mode DVD VCR
VCR DVD
DVD VCR
DVD-RW Recording Format
Timer Programming
Recording Audio Select (XP)
Auto Finalize
Dubbing Mode
Auto Chapter
VR mode
Dolby Digital
VCR DVD
10 minutes
Recording DVD
Advanced Setting Menu
Recording
Display
Select Video
Clock
Channel
Disc
Easy Setting Menu
Playback
Easy Setting Menu
Clock
Channel
DVD-RW Recording Format VR mode
Timer Programming
Auto Finalize
Progressive OFF
Advanced Setting Menu
OSD Language English
Disc
DVD VCR
VCR/DVD RECORDER
COMBINATION
Note
For VCR to DVD duplication:
• After starting VCR to DVD
duplication, the picture may be
distorted because of the auto
tracking function.
This is not a malfunction. Be
advised to play back the video-
tape until the picture is stabi-
lized, then set the starting
point which you wish to start
recording, and start VCR to
DVD duplication.
3
1
4
2
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 42