Samsung DVD-HD931 - Manual (Page 15)

AD
V
ANCED
FUNCTIONS
29 28
If you miss a scene, you can see it again using
this function.
If you press the I.REPLAY button, the current
scene moves backward about 10 seconds,
and plays back.
- Depending on the disc, the Instant Replay
function may not work.
Instant Replay
Using the Instant Replay function (DVD)
1
Use this function to skip playback 10 seconds
ahead of the current scene.
Press the I.SKIP button.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this feature may not work.
Instant Skip
Using the Instant Skip function (DVD)
1
Using the Instant Replay/Skip Function
During play, press S.FIT button on remote control.
- Allows you to eliminate the black bars in the top and bottom of the screen when
a movie is playing in the Widescreen format(16:9).
- Screen Fit will not work when the Zoom mode is active. (you can not remove
the black bars on the screen) However, Zoom mode will work when Screen Fit is
active.
Changing the Camera Angle, S.FIT Play
Press the ANGLE button to see if an ANGLE
(
) mark is present at the upper left hand
corner of the screen.
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner of
the screen.
Use the LEFT/RIGHT buttons to select the
desired screen angle.
To turn off the display, press the ANGLE
button again.
When a DVD contains multiple angles of a particular scene, you can select the Angle
function.
Using the ANGLE button
1
2
3
Using the Screen Fit button
• Various aspect ratios are available only in multiple screen format discs.
• This function does not work when a DVD has been recorded with a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
NOTE
1
0418 HD931 eng 4/24/03 11:07 AM Page 28