SysKonnect Wireless LAN Cardbus Adapter SK-54C1 - Manual (Page 17)

SysKonnect SK-54C1 Wireless LAN Cardbus Adapter
Installing the Windows 2000 Driver 17
Figure 3. Windows XP – Hardware Installation
8. To continue the installation, click C ONTINUE A NYWAY .
The menu “Please wait while the wizard installs the software” is displayed.
9. Click N EXT .
The menu “Completing the Found New Hardware Wizard” is displayed.
10. Click F INISH to complete the installation.
Service Pack 2 Windows XP Service Pack 2 provides an updated wireless networking infrastructure to en-
able easier setup and management of wireless connections. The new Wireless LAN Client
will work with a broad range of wireless hot spots, allowing customers to connect seamlessly
without having to install or update a third-party client. A new user interface also allows cus-
tomers to more easily disconnect from hot spots.
Installing the Windows 2000 Driver
To install the Windows 2000 driver, proceed as follows:
1. After you have installed the adapter in your computer, boot Windows 2000.
Windows detects the SysKonnect Cardbus Adapter during the boot operation automati-
cally. If the computer does not find the new hardware, go to chapter 6 “Troubleshooting”
on page 55.
The window “Found New Hardware Wizard” is displayed.
2. Click N EXT .
In the same window, the menu “Install Hardware Device Drivers” is displayed.