Symphonic CWF719 - Manual (Page 30)

- 30 - EN
1C29
RECORDING
Make sure ...
• TV/DVD/VCR power must be turned on.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTES:
• This TV/DVD/VCR will ONLY record and view the same channel.
• This TV/DVD/VCR CANNOT record the contents from the built-in DVD.
You can ONLY watch the same TV program that is
being recorded.
1 Select the channel to be
recorded
Press the number buttons on the
remote control or the CHANNEL
button K or L.
Remember: If the TV/DVD/VCR is connected to a
cable box or satellite box, the TV/DVD/VCR must
be on CH3 or CH4, then the channel to be recorded
must be selected on the cable box or satellite box.
2 Select the tape speed
Press the SPEED button to select
the desired tape speed (SP/ SLP).
3 Begin recording
Press the RECORD button.
4 Stop recording
Press the STOP button when recording is completed.
TV/VCR
NORMAL RECORDING
Press the PAUSE button to tem-
porarily stop recording.
Press the PAUSE or RECORD but-
ton to resume recording.
NOTES:
• After five minutes, the TV/DVD/VCR will auto-
matically switch to the Recording mode to prevent
tape damage.
• If “CLOSED CAPTION (ON)” is selected, the On-
Screen Display will appear for 5 seconds, then dis-
appear.
TV/VCR
SKIPPING UNWANTED
SCENES DURING RECORDING
CH 10
SP
REC
SP
PAUSE
SP
TD861CM(p1-35).QX33 03.9.27 1:52 PM Page 30