Placing and installation, Choosing the right place, Connection to power supply – Smeg -Freezer CR320A User Manual

Page 5

Advertising
background image

Instructions for Use

61

Placing and Installation

Choosing the Right Place

Place the appliance in a dry and regulariy ventilated room. Allowed

ambient temperature depends on the model (class) of the appliance

and is stated on the rating plate of the appliance.

In case the appliance is exposed to temperatures lower than +16°C,

the operation of the refrigerator is normal, yet the temperature in the

freezing compartment is raised which shortens the storage time of the

frozen foods.

Class

Ambient temparature

SN (sub-normal)

from + 10°C to + 32°C

N (normal)

from + 16°C to + 32°C

ST (sub-tropical)

from + 18°C to + 38°C

T (tropical)

from + 18°C to + 43°C

Never place the appliance near heat emitting devices (e.g. cooker,

radiator, water heater or similar devices) and do not expose it to direct

sunlight.

The appliance should be positioned at least 3 cm away from the

electric or gas cooker and at least 30 cm away from the oil or coal

stove. If this is not possible, use an appropriate insulation.

Behind the appliance there should be free space at least 200 cm² wide

and above the appliance the high kitchen units should be at least 5 cm

away from the appliance in order to assure adequate ventilation of the

condenser unit.

Connection to Power Supply

Connect the appliance with the cable and plug to the power supply

socket outlet with a ground terminal (safety socket).

Required nominal voltage and frequency are indicated on the rating

plate.

The connection to the mains supply and earthing have to be made

according to current standards and regulations. The appliance resists

temporary voltage tolerance up to -15 to +10 %.

Advertising