Sunbeam 3225 - Manual (Page 3)

5 4
C OFFEE M AKER F EATURES
R EMOVABLE
F ILTER
B ASKET
C ARAFE
W ARMING
P LATE
P OWER
B UTTON
C ARAFE L ID
W ATER R ESERVOIR
C OVER
F
EATURES OF
Y
OUR
S
UNBEAM
® C
OFFEE
M
AKER
• Pause ’n Serve
Allows you to interrupt the brewing cycle and pour a cup of coffee before the entire
carafe is finished brewing. To restart the brewing process, return carafe to warming plate
and coffee will automatically begin flowing through filter basket. Make sure carafe is
placed all the way on the warming plate.
CAUTION: DO NOT REMOVE CARAFE FOR LONGER THAN 30 SECONDS
OR THE FILTER BASKET MAY OVERFLOW.
• On Light
On Light lets you know when the Coffee Maker is on for safe operation.
• Snap-Out Basket
Filter basket snaps out for convenient filling and easy cleaning.
• 1-Hour Automatic Shut-Off
For safety, the SUNBEAM ® Coffee Maker has been designed with an auto shut-off feature.
The Coffee Maker shuts off automatically 1 hour after brewing cycle. To restart,
simply push the switch again.
H
OW
T
O
U
SE
Y
OUR
S
UNBEAM
® C
OFFEE
M
AKER
PREPARING YOUR COFFEE MAKER FOR USE
• Carefully unpack the Coffee Maker and remove all packaging materials.
• Before making coffee in your SUNBEAM ® Coffee Maker, thoroughly clean the carafe,
carafe lid and filter basket with warm, soapy water. Rinse and dry. Do not use harsh
or abrasive cleaners.
N OTE : Carafe, Carafe Lid and Basket are dishwasher safe.
• You may wipe the warming plate with a clean, damp cloth. However, do not immerse
the Coffee Maker in water or any other liquid.
• Prior to brewing your first pot of coffee, operate Coffee Maker once or twice with water
but without ground coffee or a paper filter. This will remove any dust that may have
settled inside the Coffee Maker which might affect the flavor of coffee.
I MPORTANT : Use cold water for best results
USING YOUR COFFEE MAKER’S CONTROLS
• Power Switch – This switch controls power to the Coffee Maker. This is a push
switch with a momentary contact to turn on and off.
• On Light – This button indicates that power is going to the Coffee Maker
and the Coffee Maker is in normal operating stage.
FILLING THE WATER RESERVOIR
• Open the hinged water reservoir cover located at the top of the Coffee Maker. Fill the
glass carafe with the desired amount of cold water. Empty the water from the carafe into
the water reservoir. POUR SLOWLY WHEN CARAFE IS FULL. Close the hinged lid.
Place the glass carafe with the lid in place on the warming plate.
NOTE: The amount of brewed coffee after the brewing process will always be slightly
less than the amount of water placed into the Coffee Maker, since some water is
absorbed by the coffee grounds and filter. Add a little extra water at the beginning
so that you have the exact number of cups desired.
P AUSE ’ N S ERVE
F EATURE
*M ODELS 3192 & 3193 COME WITH 4- CUP
S TAINLESS S TEEL CARAFE ONLY .