Star Trac Adjustable Benches none - Manual (Page 9)

ASSEMBLY
1. Install the Front Foot
Align the three drilled holes in the front foot
(5) with the mating holes in the mounting
bracket of the main frame (1). Secure the front
foot to the main frame using two screws (27),
one screw (30), one spring washer (36), five
washers (33) and two lock nuts (32). Tighten
the screws securely.
2. Install the Rear Foot
Align the two drilled holes in the rear foot (6)
with the mating holes in the mounting flange
of the main frame. Secure the rear foot to the
main frame using two screws (30), spring
washers (36) and washers (33). Tighten the
screws securely.
3. Install the Adjusting Post
Hold the adjusting post (3) in position between
the two mounting flanges on the main frame
(1). Insert one screw (9) through the adjusting
post and both mounting flanges. Secure the
adjusting post to the main frame using two
washers (34) and lock nuts (32). Tighten the
nuts securely.
■ Open the top of each carton and fold back all four flaps.
■ Remove the packing materials, foam inserts, and ALL parts from each shipping carton. Keep the contents of each carton in
a separate area to facilitate assembly. To ensure personal safety during assembly, place all packing materials outside the
assembly area.
■ Verify that all parts listed above are included in your shipment.
Take time now to enter your INSTINCT 45° BACK EXTENSION BENCH serial number in the space below. If parts are miss-
ing, or if you have any operational questions, please call Star Trac’s Service department at (800) 503-1221; have your serial num-
ber ready.
Serial No. __________________________________________
ASSEMBLY
1. Install the Rear Foot
Position the rear foot (8) between the mount-
ing flanges on the main frame (1), aligning the
drilled holes in the rear foot with the mating
holes in the main frame. Secure the rear foot to
the main frame using two screws (24), four
washers (34) and two lock nuts (32). Tighten
the nuts securely.
2. Install the Foot Rest
Hold the foot rest (4) in place on the main
frame (1). Secure the foot rest to the main
frame with two screws (30), one screw (25),
three spring washers (37) and three washers
(34). Tighten the screws securely.
STAR TRAC INSTINCT ADJUSTABLE BENCHES O WNER ’ S M ANUAL 9 12 STAR TRAC INSTINCT ADJUSTABLE BENCHES O WNER ’ S M ANUAL
1
32
34
8
24
34
34 37
25
30
37
4
1
1
32
32
33
27
33
5
33
33 36
30
33
30
36
33
6
1
32
34
3
32
34
9
1