Symbol Technologies SPS 3000 Series - Manual (Page 24)

2-5
Hardware Setup
Charging the SPS 3000 and iPAQ Using the Cradle
1. Insert the iPAQ into the SPS 3000 (see Inserting the iPAQ into the SPS 3000 on
page 2-1).
2. Insert the assembled units into the cradle (see Inserting the iPAQ and SPS 3000
into the Cradle on page 2-2).
3. Connect one end of the AC adapter into a power outlet and the other end into the
power port on the cradle (see
Figure 2-5 ).
Figure 2-5. Connecting Cradle Power
4. A flashing amber LED on the iPAQ indicates charging is in progress. When the
amber LED becomes constant, the iPAQ (main) battery is fully charged. The SPS
3000 (external) battery begins charging at this time.
Display the Power settings screen to view charging status (see Checking Battery Power on
page 2-7).
Note: The SPS 3000 battery begins charging only after the iPAQ (main)
battery is fully charged. The total charge time for both batteries can
take up to 5 hours when both batteries are completely discharged.
Cradle Power Port