Sony SA-F11 - Manual (Page 2)

2 GB
WARNING
To prevent fire or shock
hazard, do not expose
the unit to rain or
moisture.
Precautions
On safety
Should any solid object or liquid fall
into the cabinet, unplug the speaker
system and have it checked by qualified
personnel before operating it any
further.
On power sources
• AC power cord must be changed only
at the qualified service shop.
• Before operating the speakers, check
that the operating voltage is identical
with your local power supply. The
operating voltage is indicated on the
nameplate on the rear of the speakers.
• The unit is not disconnected from the
AC power source (mains) as long as it
is connected to the wall outlet, even if
the unit itself has been turned off.
• If you are not going to use the
speakers for a long time, be sure to
disconnect the speakers from the wall
outlet. To disconnect the AC power
cord, grasp the plug itself; never pull
the cord.
On placement
• Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
• Do not place the speakers near heat
sources, or in a place subject to direct
sunlight, excessive dust or
mechanical shock.
• Good ventilation is essential to
prevent internal heat buildup. Place
the speakers in a location with
adequate air circulation, and in a way
that does not block the rear
ventilation holes.
• Do not drag the unit along the floor
on installment.
On cleaning
Clean the cabinet, panel and controls
with a soft cloth slightly moistened with
a mild detergent solution. Do not use
any type of abrasive pad, scouring
powder or solvent such as alcohol or
benzine.
If you have any question or problem
concerning your speaker system, please
consult your nearest Sony dealer.