Symantec Security Expressions Server - Manual (Page 33)

Configure Servers
25
Select this check box to enable SecurityExpressions' Web-services layer. To learn more about
the Web-services layer, see SecurityExpressions Web Services API guide , included in your
installation package.
Allow Remediation
Select this check box to allow Web-services remediation functions to apply fixes to computers
audited through Web services.
Session Duration
Session duration is a time-out period that sets the maximum number of minutes for a Web
session. The session lasts until this time passes or a different Browser accesses the server.
When the session expires, local session information, including authentication, is lost. Many
settings, once initialized, remain through the session duration.
Once you open a new Browser, the session duration resets to the configured time period.
Maximum number of simultaneous audits for Audit-on-Connect
Simultaneous audits affect network capacity and speed. If you find the default number of
simultaneous Audit-on-Connect audits consumes too many CPU and network resources,
change this setting to a smaller number until you find the right balance.
Maximum number of simultaneous audits for Audit-on-Schedule
Simultaneous audits affect network capacity and speed. If you find the default number of
simultaneous Audit-on-Schedule audits consumes too many CPU and network resources,
change this setting to a smaller number until you find the right balance.
Do not use more than __ Mbps (megabits per second) of bandwidth
To control the amount of network bandwidth the software uses during an audit, select this
check box and type the maximum number of megabits per second of bandwidth you want
audits to consume. The less bandwidth allotted to audits, the longer audits will take to
complete. You must enter a number between 0.01 and 10,000.0.