Shenzhen High Power Tech C700 - Manual (Page 10)

2) IMuz would be power off automatically after disconnecting from computer safely.
3. Usage
3.1 Basic Operation
3.1.1 Power On/Off
iMuz would enter MUSIC mode automatically after power on. iMuz would play the
track that it is playing before power off last time automatically, if you set “AUTO
PLAY”. (Please refer to “4.6.7 SYSTEM” for details)
If you set “POWER OFF”, iMuz would power off automatically when the stop time
exceeds the setup time. (Please refer to “4.6.7 SYSTEM” for details)
Note: In root directory, iMuz would automatically build following folders: \_SYS, \ENCODE, \FIRMWARE,
\PLAYLIST, \TEXTFILE, \USBDATA, \VOICE RECORD. Firmware update files are preserved in “\FIRMWARE”,
play-lists in “\PLAYLIST”, FM and LINE-IN recording files in “\ENCODE”, MIC recording files in “\VOICE
RECORD” and others is system folders.
3.1.2 HOLD Switch
This function is used to prevent the buttons from being accidentally operated when you carry iMuz. To lock all
buttons please simply push the HOLD switch to the direction of the dot marked above it, an icon appears on the
“Lock” area of the LCD and no buttons will be able to operate. To release the hold function, please push the
HOLD switch to the opposite direction.
3.1.3 Reset
You need press RESET hole on the back of iMuz through a long acicular object to reboot system, when iMuz has
no any response and you can not still solve the problem in referring to FAQ. You need restart iMuz after rebooting,
and all files stored in iMuz would lose, so please firstly make sure whether your iMuz has no any response
because of battery insufficiency or wrong operation.
3.2 Remote Controller
3.2.1 Name of Parts