Smooth Fitness 5.65I - Manual (Page 26)

26 5.65i TREADMILL
TROUBLESHOOTING
Problem Reason Fix
Treadmill stops suddenly Safety key fell off Replace the safety key.
Blown fuse Change fuse
Power cord not plugged in
Plug into outlet
Electronic problem Call an authorized service
technician
E01 Stop button is held during
program set up Remove and replace safety
key to reset.
Data cable loose or defective Reconnect or Change the
wire
Computer could be defective Call an authorized service
technician
Transformer could be
defective
Controller could be defective
E02 Motor wire connection is
loose or motor is defective Reconnect the wire or Call
an authorized service
technician
The connection wire
between the motor and
controller is loose or
controller defective
E 03 Incorrect speed sensor
position Adjust the speed sensor
Improper speed sensor wire
connection Reconnect the wire.
Speed sensor could be
defective Replace the speed sensor
Controller could be defective Call an authorized service
technician
E05 Controller could be defective Call an authorized service
technician
Motor could be defective Call an authorized service
technician
---------- Computer cannot sense the
safety key signal Check and reset the safety
key.
No belt movement Motor is not receiving power Call an authorized service
technician
Erratic display function Computer memory loss Turn off and unplug the
treadmill for 5 minutes and
retry.