Sony RDR-HXD860 - Manual (Page 48)

C:\2886042111HXD860CEK\01GB-
HXD860CEK\070REC.fm
master page=left
specdef 20060621
RDR-HXD860
2-886-042-11(1)
48
To extend the recording duration time
while recording
1
Press OPTIONS during recording to
select “Extend Rec.,” and press ENTER.
2 Press M/m to select the duration time.
You can set the duration in increments of
10 minutes, for a maximum of 60
minutes.
3
Select “OK” and press ENTER.
One Touch Timer
If you use the SMARTLINK connection, you
can easily display the timer programming
menu.
When the TV is turned on or in standby
mode, press [TIMER]. The recorder
automatically turns on and the TV’s input is
switched to the recorder. The Timer
programming menu appears.
z Hint
If you are recording to the HDD or a DVD-RW (VR
mode) at a recording mode that is SP or lower and
is a 2x-speed or higher disc, you can play the title as
it is being recorded by selecting the programme title
on the Title List (page 64).
b Notes
• If a message indicating that the disc is full appears
on the screen, change the disc, or make available
space for the recording (HDD/DVD+RW/DVD-
RW only) (page 72).
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording. If
you connect equipment with a timer function, you
can use the Synchro Rec function (page 57).
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. “
” will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• The Rec Mode Adjust function only works with a
timer recording. It does not function with Quick
Timer or Synchro Rec. In addition, the Rec Mode
Adjust function does not work when recording to
the HDD while “Auto Title Erase” of the “Timer
Settings” is set to “On” in the “Recording” setup.