Sony DHG-M55CV - Manual (Page 22)

Connecting the Digital Network Receiver
16
TV with RF Connector Only
1 Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receiver’s
CABLE IN jack.
2 Connect the Digital Network Receiver’s TO TV/VCR jack to the TV’s
VHF/UHF IN ( or RF IN ) jack.
3 Connect one end of the AC power cord to the Digital Network
Receiver’s
AC IN jack, then connect the plug end to an AC outlet.
4 Tune to channel 3 on your TV to see cable channels.
TV
AC cord
Coaxial cable
From wall
outlet
1 3 2
CV.book Page 16 Thursday, November 30, 2000 2:13 PM