Sanyo XG-705A - Manual (Page 67)

67
9. How to Use Network Viewer
5. Specify the FTP server to provide image data
Host Name.... Enter IP address of the server.
Folder Path.... Specify the directory where image data are stored. When the image data is in
the root directory, just “/” will be displayed. When the image data is in a
specified directory, put slashes”/” between directories such as /test/data etc.
User ID ..........Enter login ID access to the server.*
Password ......Enter login password access to the server.*
*If both the User ID and password are anonymous, enter " anonymous ".
6. Click Set button
Click Set button to set up the server information on the specified projector.
The configured server information can be stored even if you unplug the projector .
7. Select Play Mode and display the image
Play Mode ............Auto (Infinite Loop) (Keeps playing images repeatedly)
Auto (Plays or pauses all the images according to the Auto Play Setting mode)
Manual (Plays images manually)
Auto Play Settings..Sec. (Sets time of playing back a image.)
Times (Select number of times of play back images.)
Start.......................Start playing back images.
Stop ......................Stop playing back images.
Pause ....................Suspend playing back images in Auto Play mode.
Return ..................Return to the previous page manually in Manual mode
Next ......................Go to next page manually in Manual mode.