Sony PSP-3004 - Manual (Page 6)

02
Preparing the PSP
®
system for use
Preparation
Charging the battery
Before using the PSP
®
system for the first time after
purchase, you must follow these steps to charge the
battery.
Caution
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• Do not plug the AC Adaptor for the PSP
®
system into an
electrical outlet until you have made all other
connections.
1
Remove the battery cover.
While holding down the release button, slide the battery
cover in the direction of the arrow.
2
1
Release button
2
Insert the Battery Pack.
Align the bottom surface of the battery pack with the
system to attach the battery.
1
2
Align the tabs of the battery cover with the system and
snap it in place.
4
3