Other set, Proportional p/t, Turbo p/t – Samsung C6435(P) User Manual
Page 67: Auto cal
66
ENG
6
❚
Other set
PROPORTIONAL P/T
This function controls the PAN/TILT speed to the ZOOM magnification ratio during the manual
operation of PAN/TILT. If you set PROPORTIONAL P/T to ON, the PAN/TILT speed will increase
in the ZOOM WIDE mode and decrease in the ZOOM TELE mode even in the same manual
operation.
TURBO P/T
This function doubles up the speed of PAN/TILT movement by manual operation of PAN/TILT.
The speed may go up to 180°/sec (PAN).
AUTO CAL.
This function turns on or off Auto Calibration. SCC-C6435(P)/6433(P) has the Auto Calibration
function to improve the precision of LENS and PAN/TILT motor. You may set to OFF/6H/12H/
18H/24H. Without user’s key input for the time designated by the user, A.C. will appear on the
screen while initializing LENS and PAN/TILT.
** MAIN MENU **
CAMERA SET...
VIDEO SET...
PRESET...
ZONE SET...
AUTO SET...
ALARM SET...
OTHER SET
...
CLOCK SET...
SYSTEM INFO...
(OTHER SET)
PROPORTIONAL P/T
ON
TURBO P/T
OFF
AUTO CAL.
OFF
D-FLIP
OFF
CAM RESET
...
LANGUAGE
ENGLISH
PASSWORD
OFF
RS-485
...
EXIT
QUIT