Sony VAIO VGF-HS1 - Manual (Page 39)

39
VGF-HS1 3-98-361-11(1)

To access the music content stored on your Home Server from a Wireless Digital Audio
device
Follow the steps below to access the music content on your Home Server from the VGF-WA1* Wireless
Digital Audio and listen to the music.
Additionally, you can listen to the Web radio if your Home Server is connected to the Internet.
* The VGF-WA1 Wireless Digital Audio may not be available, depending on the country or region of residency.
Note
Be sure to do the following before connecting a Wireless Adapter. See the manual that came with your Wireless
Digital Audio for the detailed instructions.

Update the Wireless Digital Audio.
To obtain update programs, visit the support Web page. For the Web page address, refer to the User Guide and
see “Getting Help.”

Turn off the AUTO INSTALL switch on the Wireless Adapter.

Press the PC button on the Wireless Digital Audio to select the PC Streaming function.

Set the Network Settings option of the Wireless Digital Audio to the default, Wireless Adapter.

Set the Server Auto Connect of the Server Settings option of the Wireless Digital Audio to the default setting,
ON.

Configure the Wireless Digital Audio only to connect to your Home Server.
1
Place the Wireless Digital Audio into standby mode and turn it off and on.
To register two or more Wireless Digital Audio units, take the same action for the other units. You can,
however, register up to 5 units at the same time.
2
Connect the Wireless Adapter connection support cable to the Wireless Adapter.

Tip
The Wireless Adapter and the Wireless Adapter connection support cable are supplied with your Wireless
Digital Audio.