Smeg SC112-2 User Manual
Smeg Kiln
42
Table of contents
INSTRUCTIONS FOR THE USER: these specify usage recommendations,
and describe the commands and the correct cleaning and maintenance
operations for the appliance
INSTRUCTIONS FOR THE INSTALLER: these are intended for the
qualified
technician who will carry out the installation, operation and testing
of the appliance
1.
INSTRUCTIONS FOR USE ............................................ 43
2.
SAFETY INSTRUCTIONS .............................................. 44
3.
INSTRUCTIONS FOR DISPOSAL – OUR
ENVIRONMENTAL CARE .............................................. 45
4.
GET TO KNOW YOUR OVEN ........................................ 46
5.
BEFORE INSTALLATION............................................... 46
6.
AVAILABLE ACCESSORIES .......................................... 47
7.
USING THE OVEN ......................................................... 48
8.
COOKING WITH THE OVEN ......................................... 59
9.
CLEANING AND MAINTENANCE.................................. 69
10. EXTRAORDINARY MAINTENANCE .............................. 74
11. INSTALLING THE APPLIANCE ...................................... 78
Document Outline
- 1. INSTRUCTIONS FOR USE
- 2. Safety instructions
- 3. Instructions for disposal - Our environmental care
- 4. GET TO KNOW YOUR OVEN
- 5. Before installation
- 6. AVAILABLE ACCESSORIES
- 7. using the oven
- 7.1 General Description
- 7.1.1 Oven racks
- 7.1.2 Cooling system
- 7.1.3 Inside light
- 7.5.1 Setting the current time
- 7.6.1 Cooking with preset temperature
- 7.6.2 Changing the preset temperature
- 7.6.3 Using the minute minder
- 7.7.1 Semiautomatic cooking
- 7.7.2 Automatic cooking
- 7.8.1 Modifying the data set (during cooking)
- 7.8.2 Automatic cooking with a recipe
- 7.8.3 Selecting a recipe permanently
- 1 From ON status, select the recipe to modify with PT2. Within 5 seconds of the selection, hold down PT1 for at least 2 seconds. The symbol flashes indicating the recipe modification phase.
- 2 Now, by turning PT1, you can modify the cooking function to associate to the recipe being modified. Press PT1 to confirm.
- 3 Setting the temperature. The preset temperature will be displayed on DSP2 flashing; press PT1 to modify it. Press PT1 to confirm.
- 4 Modifying the cooking duration. The preset cooking duration will be displayed on DSP1 flashing. Turning PT1 you can modify it. Press PT1 to confirm.
- 5 Modifying the recommended runner. The recommended runner will flash; turning PT1 you can modify the number. Press PT1 to exit the programming, the symbol will stop flashing.
- 7.9 Table of predefined recipes:
- 7.10 Secondary menu
- 8. cooking with the oven
- 9. CLEANING AND MAINTENANCE
- 10. EXTRAORDINARY MAINTENANCE
- 11. INSTALLING THE APPLIANCE