SATO CL612e - Manual (Page 4)

CL ‘e’ Series Quick Guide
Pg 2
What You Get
The CL ‘e’ Series Thermal Transfer printer comes packed in a protective carton.
Included in the carton are the following items :
• CL ‘enhanced’ Series Printer
• Quick Guide
• Driver / Manual CD ROM
• Head Cleaning Sheet
• Sample Ribbons
• Ribbon Take-Up Core (Not for Export out of Singapore)
• Power Cable
• Test Printout Labels
CL ‘e’ Series Quick Guide
Pg 15
Media & Supplies
The Printer comes from the factory set up to operate with high-quality TechnoTherm
thermal transfer media and ribbons. A sample roll of wax ribbon, ST111 (76.2mm x
15M) is shipped with the printer.
Other media and supplies may or may not give acceptable results in the printing. It is
likely that you will have to experiment with the heat and speed settings to obtain
quality printing. Instructions for adjusting the heat and speed for optimum print
quality can be found in the Operator & Technical Reference Manual, Section 3.
Options
Plug-In Interface
The Printer uses Plug-In Interface cards for maximum flexibility. Currently available
interfaces are IEEE1284 Parallel, Serial RS232, Universal Serial Bus (USB) and
10/100BaseT Eternet
Label Dispenser
The Printer Label Dispenser Option is an internal mechanism that provides the ability
to print labels in the ‘demand’ mode. When it is installed, the printer dispenses one
label at a time, peeling the backing from the label. The excess label backing is taken
up on an internal rewind spindle.
PCMCIA Memory Expansion
The Memory Expansion option provides the connectors and interface for a PCMCIA
Memory Cards. Each PCMCIA card slot will accept SRAM memory cards up to
4MB SRAM or Flash Memory Card of up to 16MB.
Calendar Option
The Calendar Option allows the date and time to be maintained in the local printer
where it can be recalled for label printing. The Calendar Option is Y2K compliant
and supports both standard and Julian dating.
After taking the CL ‘e’ Series Printer out from the carton and
removing the protective plastic cover, it is ready for
installation.