Silvercrest KH 1161 - Manual (Page 7)

- 5 -
Risk of personal injury!
Never attempt to remove food from the bowl 6
when the blade 7 is still in motion. Contents could
shoot out and make a mess.
➩
Wait until the blade 7 has stopped rotating.
➩
Lift the motor block 2 from the lid collar 3.
➩
Remove the lid 4.
Risk of personal injury!
To avoid injuries, exercise caution when handling
the extremely sharp blade 7. Keep the blade 7
out of the reach of children.
➩
Carefully pull the blade holder 5 with the knife
7
out of the bowl 6.
➩
Remove the contents.
Note
Due to the grinding of hard and abrasive foodstuffs,
the bowl 6 can take on a dull appearance over
time. This is normal and does not influence the
functioning of the appliance.
Tip
After you have finished processing the foodstuffs,
you can use the appliance base
o as a cover for
the bowl y , this will help to keep the foodstuff fresh
for longer.
➩
Remove the motor block 2 and the lid 4 from
the bowl
y .
The blade retainer 5 with the blade 7 can, if
you wish, remain in the bowl.
➩
Loosen the appliance base o from the undersi-
de of the bowl y . You can now place applian-
ce base o on the bowl y so that it seals the
bowl y .
Cleaning
Risk of electric shock!
Always remove the plug from the power socket
before cleaning the universal food processor.
Under no circumstances may the appliance be
immersed in water or held under running water
during cleaning.
Risk of personal injury!
To avoid injuries, exercise caution when handling
the extremely sharp blade 7. Reassemble the univer-
sal food processor after using and cleaning it so
that you do not injure yourself on the exposed
blade 7. Keep the blade 7 out of the reach of
children.
Attention!
Do not clean the motor block 2 in the dish-washer
as doing so would damage it.
➩
Unplug the power cable from the socket.
➩
Clean the motor block 2 and the blade holder
5
with the blade 7 by using a well pressed-out
sponge.
➩
Wash the bowl 6, the lid 4 and the appliance
base 9 under running water and use a tea-towel
to dry them.
➩
Alternatively, you can wash all components,
EXCEPT the motor block 2, in the dish-washer.
IB_KH1161_46550_LB6 24.02.2010 11:02 Uhr Seite 5