Samsung SilverCare Silver Care Washer - Manual (Page 23)

SAMSUNG Clothes Washer Owner’s Instructions E-4
Troubleshooting
Code Symbol Meaning Solution
Problem with control. Call for service. See below.
Electric service was lost when
Washer was running.
Restart the cycle by pressing the Cycle Selector
dial.
A fault is detected in the water
level sensor.
Call for service
Jammed Key. Call for service
Motor speed sensor problem. Restart the cycle.
If the code reappears, call for service, see below
Temperature sensor problem. Restart the cycle.
If the code reappears, call for service, see below
High current detected. Restart the cycle.
If the code reappears, call for service, see below
High/Low voltage detected. Restart the cycle.
If the code reappears, call for service, see below
Vibration sensor problem. Restart the cycle.
If the code reappears, call for service, see below
SilverCare™ control problem Restart the cycle.
If the code reappears, call for service, see
below.
Suds is detected during the
washing session.
Reduce amount of detergent usage.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)