Sony HVR-Z7E - Manual (Page 41)

41
R
e
co
rd
in
g/
Pl
ay
bac
k
WB SHIFT
To set items for the white balance shift.
DETAIL
To set items for the detail.
Item Description and settings
[FILTER TYPE] Selects a color filter type for the white balance shift.
[LB-CC] : Film type (color conversion and correction)
[R-B] : Video type (correction of R and B levels)
[LB[COL TEMP]] Sets a color temperature offset value.
-9 (bluish) to +9 (reddish)
[CC[MG/GR]] Sets a color correct offset value.
-9 (greenish) to +9 (magentish)
[R GAIN] Sets an R level.
-9 (low R level) to +9 (high R level)
[B GAIN] Sets a B level.
-9 (low B level) to +9 (high B level)
Item Description and settings
[LEVEL] Sets the detail level.
-7 to +7
[MANUAL SET] [ON/OFF] : Turns on and off the manual detail adjustment.
[ON] : Enables the manual detail adjustment (automatic
optimization will not be performed).
[OFF] : Disables the manual detail adjustment.
[V/H BALANCE] : Sets the horizontal (H) and vertical (V) balance of
detail.
[B/W BALANCE]: Selects the balance of the upper DETAIL (P) and
the lower DETAIL (N).
TYPE 1 (off to the lower DETAIL (N) side) to
TYPE 5 (off to the upper DETAIL (P) side)
[BLACK LIMIT] : Sets the limit level of the lower DETAIL (N).
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[WHITE LIMIT] : Sets the limit level of the upper DETAIL (P).
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[CRISPENING] : Sets the crispening level.
0 (shallow crispening level) to 7 (deep crispening
level)
[HI-LIGHT DTL] : Sets the DETAIL level in the high intensity areas.
-2 to +2
Continued ,