Getting started, Charge battery – Siemens 1168 User Manual

Page 12

Advertising
background image

7

9/23/02

k45dm-ger.fm

A50 Stingray, English 2, A31008-H5110-A28-1-7619

Getting Started

Charge battery

The battery is not fully charged when
delivered, so:
• Plug in charger cable at the bot-

tom of the phone, plug in the plug-
in power supply unit to the mains
power socket and charge for at
least two hours.

• Push the sides of the charger ca-

ble plug together and pull to re-
move it.

Functions without SIM card

To display the functions that can be
used without SIM card, switch on
the phone

without the SIM card:

§Menu§

Press soft key.

Special case:

§SOS§

Emergency number, SOS
(p. 10).

If the battery is totally discharged no charge

icon is displayed at the beginning of the

charging process.
If this is the case leave the charger cable

plugged in, the charge icon will appear after

a maximum of 2 hours. The battery is then

automatically charged.

Charging
The charger heats up when used for long

periods. This is normal and not dangerous.

Á

When charging is in progress.

e

End of charging.

An empty battery is fully charged after about

2 hours. Charging is only possible in an am-

bient temperature of 5 °C to 40 °C (the

charge icon flashes as a warning when the

temperature is 5 °C above/below this

range). The voltage specified on the power

supply must not be exceeded.

Operating times
A fully charged battery provides 60-250

hours of standby time or 100-300 minutes

of talk time. The operating times are aver-

age values and depend on the operating

conditions (see table below).
Charge level display (full-empty):

a}b{c

A beep sounds when the battery is nearly

empty.

Operation carried

out

Time

(min)

Decrease of

standby time by

Calling

1

30 to 60 minutes

Display back

light *

1

30 minutes

Network search 1

5 to 10 minutes

* key input, games, organiser etc.

Advertising