Sierra Siera IP Camera VSP 3001 - Manual (Page 22)

20
Appendix 1: Reset to factory default
In some case, we need reset the server to factory default which can operate on
Setup Page. If the user can not login the Setup Page(such as forgetting the user name
and the password), it will be available for resetting to factory default through ARP and
PING to re-assign the IP address.
Notes: after the success of re-assigning the IP address through ARP and PING, all
other settings shall be reset to factory default except IP address setting.
8 APPENDIX
A ssign IP address through ARP notes before operation:
Check the correct connection to the net and with the power for
IP camera.
Obtain a unique IP address from administrator.
MAC address: there is a unique Ethernet address for every
VSP-3001 IP
camera(MAC address is labeled on bottom of the
IP camera). The Ethernet
address is a number with 12 figures(such as 00-0c-e8-xx-xx-xx).
Fox example, the IP address for PC is 192.168.1.6, the IP address for
VSP-3001
IP camera will be set as 192.168.1.61, the MAC address is 00-0c-e8-xx-xx-xx.
The IP address of
VSP-3001 network camera must have the same IP domain
with the IP address of PC(it means the same subnet mask). For example, the
IP address of PC is 192.168.1.6, the IP address of network camera is 192.168.1.61,
and the subnet mask is 255.255.255.0. If the subnet mask is 255.255.255.128 or
higher, the domain will not cover 192.168.1.61 and the setting will not be effective.
Operation procedure
1 IN operation system of Windows, open the DOS window and
operate as <start all programs accessory command
prompt> to DOS.