Troubleshooting, Specifications, Additional information – Sony CDP-CA8ES User Manual

Page 19

Advertising
background image

Additional Information

19

EN

Troubleshooting

If you experience any of the following difficulties while
using the player, use this troubleshooting guide to help
you remedy the problem. Should any problem persist,
consult your nearest Sony dealer.

There’s no sound.

/

Check that the player is connected securely.

/

Make sure you operate the amplifier correctly.

/

Adjust the playback level using the LINE OUT/
PHONE LEVEL control.

The CD does not play.

/

There’s no CD inside the player (“–NO␣ DISC–”
appears). Insert a CD.

/

Place the CD with the label side up on the disc
tray correctly.

/

Clean the CD (see page 18).

/

Moisture has condensed inside the player.
Remove the disc and leave the player turned on
for about an hour (see page 18).

The recording level has changed.

/

When you connect the amplifier via the
VARIABLE LINE OUT jacks, the recording level
changes if you adjust the LINE OUT/PHONE
LEVEL control on the player or press LINE
OUT LEVEL on the remote during recording.

The remote does not function.

/

Remove the obstacles in the path of the remote
and the player.

/

Point the remote at the remote sensor g on the
player.

/

Replace all the batteries in the remote with new
ones if they are weak.

The player functions incorrectly.

/

The microcomputer chips may be operating
incorrectly. Turn the power off, then turn it
back on to reset the player.

Specifications

Compact disc player

Laser

Semiconductor laser

Wavelength

780 – 790 nm

Frequency response

2 Hz to 20 kHz ± 0.3 dB

Dynamic range

More than 100 dB

Harmonic distortion

CDP-CA9ES: Less than 0.0023%
CDP-CA8ES: Less than 0.0025%

Output

LINE OUT
(FIXED)

LINE OUT
(VARIABLE)

DIGITAL
OUT
(OPTICAL)

PHONES

Jack
type

Phono
jacks

Phono
jacks

Optical
output
connector

Stereo
phone
jack

Maximum
output
level

2 V
(at 50 kilohms)

2 V
(at 50 kilohms)

–18 dBm

15 mW

Load
impedance

Over 10 kilohms

Over 50 kilohms

Wave length: 660 nm

32 ohms

General

Power requirements

Where purchased␣

Europe

Canada

Other countries

Power consumption

CDP-CA9ES: 17 W
CDP-CA8ES: 15 W

Dimensions (approx.)

430

Ч

125

Ч

400 mm

(w/h/d)

(17

Ч

5

Ч

15 3/4 in.) incl. projecting

parts

Mass (approx.)

CDP-CA9ES: 7.5 kg (16 lbs 9 oz)
CDP-CA8ES: 7.0 kg (15 lbs 7 oz)

Supplied accessories

Audio cord (2 phono plugs – 2 phono plugs) (1)
Remote commander (remote) (1)
Sony SUM-3 (NS) batteries (2)

Design and specifications are subject to change without notice.

Power requirements

220 V – 230 V AC, 50/60 Hz

120 V AC, 60 Hz

110 V – 120 V or 220 V – 240 V AC,
adjustable, 50/60 Hz

Advertising