Sony PEG-T665C - Manual (Page 175)

Sound Utility/Sound Converter
175
Chapter 9
To stop playback
Tap .
To play the sounds repeatedly
Tap and change it to .
To adjust the volume
Tap or to increase or decrease the volume.
If the sounds are hard to hear
Adjust the sound level of the original sound data, then transfer the
data to your CLIÉ handheld again.
1
Delete the sound data (see the following section for details).
2
Perform steps 1 and 2 on page 172.
3
Click the desired data from the data list.
4
From the Edit menu, click Conversion Volume Control.
The Conversion Volume Control window is displayed.
5
Adjust the volume by sliding the volume bar.
6
Click OK.
7
Perform steps 3 to 7 on page 172.
Notes
• Not all the sound data may become easier to hear with the above procedure.
• The tone of MIDI sounds may be different when played back on the CLIÉ
handheld.
Note on sound data
The playback sound may be distorted depending on its tone and volume.