Sony DSR-1600.GB - Manual (Page 51)

51
Connections for a Digital Non-Linear Editing System
Chapter
5
Connections and
Settings
Connections for a Digital Non-Linear Editing System
This unit can be connected to an ES-7 EditStation to
configure a digital non-linear editing system.
If you use the SDTI (QSDI) interface with the optional
DSBK-1602 board installed in the unit, you can transfer
video, audio, time code, and other compressed data from
this unit to the ES-7.
The unit supports ClipLink functions, enabling index
pictures recorded on tape and ClipLink log data stored in
cassette memory to be transferred to the ES-7 in an instant.
For a general description of ClipLink functions, see the
appendix “ClipLink Guide” (page 73).
The following figure shows a connection diagram for a
non-linear editing system in which this unit serves as the
player.
For connections of the ES-7 and its peripheral devices
such as the ESBK-7011 Control Panel, the ESBK-7045
Disk Unit, etc., refer to your ES-7 Operating Instructions.
Note
The example connections shown in this chapter assume
that the optional DSBK-1601/1602/1803 and DSBK-1801/
1802/1803 boards are installed as required on the DSR-
1600/1600P and DSR-1800/1800P, respectively.