Sony HT-DDWG700 - Manual (Page 45)

45 US
O
ther O
p
e
ra
tions
1
Press DMPORT.
You can also use the INPUT SELECTOR
on the receiver to select “DMPORT”.
2
Start playback of the connected
component.
The sound is played back on the receiver.
For details, refer the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Note
Depending on the type of DIGITAL MEDIA PORT
adapter, you can operate the connected component
by using the remote. For details on remote button
operation, see page 9.
Tip
When listening to MP3 or other compressed music
using a portable audio source, you can enchance the
sound. Press MUSIC repeatedly to select
“PORTABLE” (page 36).
Naming inputs
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
1
Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press V/v repeatedly to select
“5-AUDIO”.
4
Press or b to enter the
menu.
5
Press V/v to select “NAME IN”.
6
Press or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 43).
Listening to a connected
component through DMPORT
connection