Sony VPCSB - Manual (Page 3)

VPCSB Series Hard Disk Drive
Replacement Instructions
FOR TECHNICAL SUPPORT IN THE US CALL TOLL FREE 1-866-651-7669 FROM 9:00 AM TO 11:00 PM EST
P/N 989202617 Rev. B 3/4
Step 4. Arrange the Brackets & screws
as shown above. Set the old HDD aside. HDD Reassembly
Step 1. Place the new Hard Drive in the
same position as the old Hard Drive so
that it aligns with the Brackets as shown.
Step 2. Re-install the four (4) Hard
Drive Bracket screws to secure the
Brackets to the New Hard Drive.
Step 2. Re-install the four (4) Hard
Drive screws holding the Hard Drive
assembly in place. Step 3. Re-install the HDD Cable to the
Hard Drive by aligning the connectors.
Note: The wide end of the Cable
attaches to the Hard Drive at this step.
HDD Reinstallation
Step 1. Reseat the Hard Drive into the
Hard Drive Bay.
Old Hard Drive
DriveDrive