Sony DSR-1P - Manual (Page 6)

Interchangeable Battery Cases
In addition to the supplied battery case for one NP-1B,
the DSR-1P can accept various batteries to extend its
operating time. The DC-520, when attached to the supplied
battery case, allows the DSR-1P to house two NP-1B
batteries. BP-L60A Lithium Battery can be also attached to
the back of the DSR-1P.
Others
• Easy Integration with Anton/Bauer ® Equipment
• Versatile Signal Interfaces
The DSR-1P is equipped with versatile signal interfaces
such as S-video and composite outputs. For audio
interfaces, an earphone output, unbalanced phono output
and balanced XLR-type audio inputs are provided.
• DC Out Connector for Wireless Microphone
Powering
• +48V Powering for External Microphone
• Built-in Loudspeaker
User Friendly Operation
VTR Full Function Control
Eject, Rewind, Play, Fast Forward, and Stop function
buttons are located on the top of the unit and are covered
with a lid to prevent accidental access. During Rec mode,
all function buttons are automatically inhibited. The Rec
mode can also be activated with the trigger buttons on the
front of the camera or on the zoom lens grip.
Comprehensive LCD Display
An 8-digit LCD display provides an extensive range of
critical information about the VTR operation. In addition to
time data (including Time Code, counter and User Bit data),
remaining tape quantity and battery capacity, the ClipLink
operation status is also displayed. A digital audio meter
allows precise adjustment of the audio recording level.
Menu Selection
Various VTR menus such as cumulative hours (head drum
operating hours, tape transport operation hours, total
operation hours), ClipLink On/Off mode, selection of audio
mode, Anton/Bauer Logic Series
® Digital battery capacity
indication settings and stand-by period setting can be
shown on the LCD display for easy access to the various
menus.
Reliable and Serviceable
Built-In Self-Diagnostics and
Hours Meter
Should an error be detected, an error message will be
displayed which will identify the problem area. In this way,
down-time can be minimized.
Furthermore, an hours meter is provided to indicate the
elapsed time of time-critical operations such as
accumulated drum rotation time. It can easily be displayed
on the LCD display via menu selection.
<WRR-855A>
*A BTA-801 is required
when the WRR-855A is
attached to the DSR-1P
* WRR-855A/810A can not be used in
some areas.
<BP-L60A> <BP-L90A>
*Camera adaptor is optional.
DSR-1P is directly connected to the cameras.
Peripheral
Equipment
DXC-D30WSP
Digital Video Camera
DXC-637P
Colour Video Camera
NP-1B
Rechargeable NiCd Battery
BP-L60A/BP-L90A
Rechargeable Lithium-ion
Battery
BKW-L601
Battery Adaptor for
BP-L60A/L90A
DC-520
Battery Case for NP-1B
BC-1WDCE
Battery Charger for four
NP-1B batteries
BC-410CE
Battery Charger for four
BP-L90A and four NP-1B
batteries
WRR-855A/810A
Wireless Microphone
Receiver
* *