Salton, Inc MEGIBKIT - Manual (Page 3)

3
cord must be: (1) marked with an electrical rating of 125 V, and at least
10 A., 1250 W., and (2) the cord must be arranged so that it will not
d rape over the countertop or tabletop where it can be pulled on by
children or tripped over accidentally.
POLARIZED PLUG: This appliance has a polari zed plug, (one bl a d e
is wider than the other). As a safety feature to reduce the risk of elec-
t rical shock, this plug is intended to fit in a polari zed outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electri c i a n . Do not attempt to defe a t
this safety fe a t u r e.
Using Your Coffee Grinder
1. Before using, wipe lid, blade and bowl with a damp lint-free
cloth (see Care and Cleaning).
CAUTION: BLADES ARE SHARP. HANDLE CAREFULLY.
CAUTION: NEVER PLACE MOTOR BASE OF APPLIANCE IN
WATER OR OTHER LIQUIDS.
2. Place up to 3/4 cup of coffee beans into the stainless steel
bowl at a time. If a larger quantity is needed, grind in several
small batches.
3. Place the lid on the bowl.
NOTE: The appliance will not operate unless the lid is correctly
placed on the base.
CAUTION: DO NOT ATTEMPT TO OPERATE WITHOUT THE LID
PROPERLY IN PLACE.
4. Plug into 120 V ~ 60 Hz outlet.
5. To start grinder, depress the on/pulse button for 20 seconds.
Grinding time will vary with capacity and personal preference.
Do not operate for more than 60 seconds at a time.
6. When finished grinding, unplug the unit.
7. Wait until the blade stops rotating, then remove lid.
8. Remove ground coffee from bowl or turn upside down and
shake the grounds into the lid for easy measuring.