Southwing NEOVOICE 5 Bluetooth Wireless Headset - Manual (Page 7)

8
green (you will hear first one tone to
indicate the headset is on, and then a
second tone to indicate that it is now
ready for pairing). You now need to wait
several seconds while both devices
attempt to pair.
4. Follow the menus on your mobile phone to finalise
the pairing process. If you are as ked for a PIN
number, note that the default PIN number for the
SouthWing Bluetooth Headset is 1111.
Please Note:
•
If pairing is successful, the Headset
Indicator Light [ 2 ] will begin flashing green.
You can now start using your Headset.
• If pairing is unsuccessful, the Headset Indicator
Light [ 2 ] will turn off and the Headset will return to
the off state (ready to re-enter pairing mode).
Pairing
Before using your Headset you will need to
pair it to your Bluetooth mobile phone. You will
need to repeat this process if you want to use
your Headset with another mobile phone.
Pairing is a feature of your Bluetooth Headset
that prevents anyone else eavesdropping on your
phone conversations.
1. Ensure the Headset is off and that the mobile
phone with which you wish to pair are not too far
apart (less than 1 meter of separation will ensure
most reliable pairing).
2. Put the mobile phone into pairing mode (see the
instructions which came with your phone).
3. Press and hold the Multi-function Dial [1]
for about 3 seconds until the Headset Indi-
cator Light [2] alternates between red and
Pairing
GRE E N
GRE E N RE D