Sony FST-ZX100D - Manual (Page 51)

T
a
pe – Pla
y
ba
c
k
/T
a
p
e – Rec
o
rd
ing
51 US
You can record a whole disc onto a tape. You
can use TYPE I (normal) tape. The recording
level is adjusted automatically.
Use the buttons on the unit for the operation.
1
Load a recordable tape into Deck B.
2
Press DVD and load a disc you want to
record.
3
Press CD SYNC.
“SYNC” lights up in the display and
“REC” flashes in the display.
Deck B stands by for recording.
4
Press DIRECTION repeatedly to select
“
g ” to record on one side or “ j ”
(or “RELAY”) to record on both sides.
5
Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
To stop recording
Press x.
Notes
• You cannot listen to other sources while recording.
• When you press CD SYNC, the sound field is
automatically changed to LINK if the current sound
field is SBS MULTI, A.F.D. AUTO, PRO LOGIC,
PLII MOVIE, PLII MUSIC, V.M.DIM or 2CH
STEREO and to HP 2CH if the current sound field is
HP VIRTUAL.
• CD Synchro Recording stops when the current disc
finishes playback.
• The CD Synchro Recording function cannot perform
under the following conditions:
– During playback of the disc.
– When the display for entering the password
appears on the TV screen during Custom Parental
Control function.
– Before the system finishes reading the Table of
Contents (TOC) of the disc.
• When CD Synchro Recording starts,
– the setting for Repeat Play changes to “REPEAT
OFF”.
– Program Play and Shuffle Play is canceled.
• When you record from a VIDEO CD, PBC playback
is automatically canceled.
• If you connect or disconnect a microphone or
headphone during recording, the sound may cut off
for a moment.
Tips
• When recording from the reverse side:
After step 1 of “Recording your favorite disc onto a
tape” (page 51), press TAPE A/B repeatedly until
“TAPE B” appears in the display. Press nN
repeatedly until the TAPE B reverse side indicator
lights up to start playback of the reverse side. Press
x at the point you want to start recording.
• When recording on both sides:
Be sure to start from the front side. If you start from
the reverse side, recording stops at the end of the
reverse side.
You can record just the portions you like from a
disc, tape or radio program onto a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 71).
Use the buttons on the unit for the operation.
1
Load a recordable tape into Deck B.
2
Press DVD, TUNER/BAND, TAPE A/B,
TV/SAT or VIDEO to select the source
you want to record.
3
Load the disc, tape or tune to the
station you want to record. To record
from the connected component,
connect the external audio sources.
4
Press REC PAUSE/START.
“REC” flashes in the display.
Deck B stands by for recording.
5
Press DIRECTION repeatedly to select
“
g ” to record on one side or “ j ”
(or “RELAY”) to record on both sides.
Tape – Recording
Recording your favorite
disc onto a tape
— CD Synchro Recording
Recording onto a tape
manually
— Manual Recording
continued