Sony FST-ZX100D - Manual (Page 53)

So
un
d Ad
ju
stmen
t
53 US
To cancel the preset effect
Turn OPERATION DIAL clockwise or
counterclockwise until “FLAT” appears in the
display.
Note
To store the user equalizer setting, see “Adjusting the
graphic equalizer and storing the user equalizer
setting” on page 53.
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer settings in the
memory.
Use the buttons on the unit for the operation.
1
Press EQ BAND repeatedly to select a
frequency band.
2
Turn OPERATION DIAL clockwise or
counterclockwise to adjust the level.
3
Repeat steps 1 and 2 to adjust the level
of other frequency bands.
4
Press ENTER.
A user equalizer number flashes in the
display.
5
Turn OPERATION DIAL clockwise or
counterclockwise to select a user
equalizer number (1~3) you want to
store the equalizer setting.
6
Press ENTER.
This setting is automatically stored as the
user equalizer setting you selected in step 5.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
To cancel storing
Turn OPERATION DIAL clockwise or
counterclockwise in step 5 to select “EXIT?”,
then press ENTER.
To call up a user equalizer setting
Turn OPERATION DIAL clockwise or
counterclockwise until the user equalizer setting
number you want appears in the display.
You can take advantage of the surround sound
simply by selecting one of the sound fields.
They bring the exciting and powerful sound of
movie theaters into your home.
1
Press SOUND FIELD.
The last selected sound field appears in the
display.
2
Press
V
/
v
or
B
/
b
repeatedly (or turn
OPERATION DIAL on the unit
clockwise or counterclockwise) when
the last selected sound field appears in
the display to select the sound field
you want.
The display changes as follows:
x When the headphones are not connected
SBS MULTI 1) y A.F.D. AUTO 1) y
PRO LOGIC 1) y PLII MOVIE 1) y
PLII MUSIC 1) y V.M.DIM. 1) y
LINK y 2CH STEREO
x When the headphones are connected
HP 2CH y HP VIRTUAL 1)
Adjusting the graphic
equalizer and storing the
user equalizer setting
Frequency level Frequency band
Selecting the sound field
continued