Sony STR-DE905G - Manual (Page 43)

43 EN
Settings and Adjustments
DEMO:
This display mode activates a program that explains the
various functions of the receiver. Please note that when
the program is running it replaces previously stored
data (such as surround sound parameters) with data
from the program. Therefore, you should only use the
DEMO mode when no data has been stored or when
rewriting existing data does not matter.
Click START to activate the program. To stop the
program, click the button on the remote two or three
times or turn off the receiver.
IR OUTPUT:
When it is set to OFF, the IR signals are only output
from the IR OUT jack on the rear panel. No IR signals
will be output from the IR repeater on the front panel.
When the IR OUTPUT is set to OFF, “IR OFF” appears
in the main menu.
Normally, IR OUTPUT should be set to ON.
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
Adjusting the Position of the
On-Screen Display
The graphic position function (GRAPHIC POSITION)
lets you make fine adjustments to the overall position
of the on-screen display control panel.
1
Click FUNCTION in the main menu.
The FUNCTION SELECT menu appears.
2
Click TV SET.
3
Click GRAPHIC POSITION SET.
The position adjustment screen appears.
The position adjustment screen appears.
Click the boarders to adjust the position so you
can just see the top, bottom, right and left edges of
the boarder.
4
Click EXIT.
To return to the main menu
Click EXIT.
To go to the previous menu
Click RETURN.
EXIT
V
B
v
b
EXIT
TV MONITOR SET
GRAPHIC POSITION
RETURN
TV IR SET
SET
VIDEO
TV INPUT