Sound Storm Laboratories PLC-XU84 - Manual (Page 37)

37
Computer Input
Select Digital zoom +. The On-Screen Menu disappears and
“D. zoom +” appears. Press the SELECT button to expand
the image size. Use the Point
ed7 8 buttons to pan the
image. The Panning function can work only when the image
is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM
e button on the remote control.
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM
ed buttons, SELECT, and Point buttons.
Digital zoom +
Select Digital zoom –. The On-Screen Menu disappears and
“D. zoom –” appears. Press the SELECT button to compress
image size.
The projected image can be also compressed by pressing the
D.ZOOM
d button on the remote control.
Digital zoom –
To return to the previous screen size, select a screen size
from the Screen Size Adjustment Menu or select an input
source from the Input Source Selection Menu (see pages
28-29) again, or adjust the screen size with the D.ZOOM
ed buttons.
For zooming in and out the images
✔
Notes:
•The panning function may not operate properly if
the stored Mode in the PC Adjust Menu is used
(p.33).
•Minimum compression ratio can be limited
depending on the input signal or when the
Keystone function is working.
• True, Full screen, and Digital zoom +/– cannot
be selected when 480i, 575i, 480p, or 575p is
selected in the PC System Menu (p.30).
•Digital zoom +/- cannot be selected when Full
screen or True is selected.
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D.ZOOM - button