Sound Storm Laboratories PLC-XU84 - Manual (Page 60)

60
Maintenance and Cleaning
Cleaning the Projector Cabinet
Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the lens.
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning
cloth. When the cabinet is heavily soiled, use a small
amount of mild detergent and finish with a soft dry cleaning
cloth. Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch
the surface of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.
When moving this projector or while not using it over an
extended period of time, replace the lens cover.
Attach the lens cover according to the following procedures.
Pass the string through a hole of the lens cover. 1
2 Turn over the projector and remove the screw with a
screwdriver.
Attaching the Lens Cover
Attach the string with lens cover to a hole at the
bottom of the projector and secure it with a screw. 3
Lens Cover
String for the lens cover
Secure it to the hole
with a screw.
Hole