Sony CDX-C6600 - Manual (Page 14)

14
Locating a specific track
— Automatic Music Sensor (AMS)
During playback, push the SEEK/AMS
control up or down and release for each
track you want to skip.
Locating a specific point in a track
— Manual Search
During playback, push the SEEK/AMS
control up or down and hold. Release
when you have found the desired point.
Locating a disc by disc number
— Direct Disc Selection
Press the number button that
corresponds with the desired disc
number.
The desired disc in the current unit begins
playback.
To locate succeeding
tracks
To locate preceding
tracks
To search forward
To search backward
SEEK/AMS
SEEK/AMS
With Optional Equipment
CD/MD Unit
This unit can control a maximum of seven
external CD/MD units in this configuration:
CD unit-maximum of five.
MD unit-maximum of five.
Any combination up to seven will work.
Playing a CD or MD
1
Press (SOURCE) repeatedly to select CD
or MD.
2
Press (MODE) until the desired unit
appears (for example: CD2 or CD3).
CD/MD playback starts.
When a CD or MD changer is connected, all
the tracks play from the beginning.
Changing the display item
Each time you press (DSPL) during CD/MD
playback, the item changes as follows:
$
Track number/
Elapsed playback time
$
Clock*
* If the dual information function is on, the clock
does not appear in the display.
After you select the desired item, the display
will be automatically change to the Motion
Display mode after a few seconds.
In the Motion Display mode, all the above
items are scrolled in the display one by one in
order.
Tip
The Motion Display mode can be turned off. (See
“Changing the sound and display settings” on
page 13).