Speco Technologies MCHH-200 - Manual

Congratulations on your purchase of Speco Technologies’
MCHH-200 Performance Handheld Microphone!
Speco Technologies has leveraged over 40 years of audio industry experience to bring you the highest level of quality
performing microphones in the industry. Speco Technologies’ MCHH-200 microphone’s design and components are
designed specifically for mobile applications. The mesh with a copper-solder structure, zinc-alloy body and a bright,
smooth surface treatment is weather-resistant and can be used for outdoor applications. The sleek case design of
MCHH-200 fits ergonomically into the hand to prevent the microphone from being dropped. Surrounding noise
interference is extremely low due to a high-grade balance and shielded cable.
200 New Highway Amityville, New York 11701 • Outside Metro NY: 1-800-645-5516
631-957-8700 • www.specotech.com
Features:
• Hyper-Cardioid polar pattern reduces feedback .
• Clear tone quality prevents “pop” noises for the higher sounds.
• High-quality zinc-alloy metal, weather-resistant housing.
• An integrated windscreen sponge protects against wind and breathing pick-up.
Specifications:
Element: Dynamic
Polar Pattern: Uni-Directional
Frequency: 40Hz~15kHz
Sensitivity: -52dB ±3dB (0dB=1V/Pa at 1kHz)
Output impedance: 600 ohms ±30% (at 1kHz)
Frequency Response Graph:
Connecting and disconnecting the microphone cable:
1. Insert the XLR connector end of the microphone cable into the microphone.
If necessary, rotate the connector to align the ridge on the cable connector and the groove
in the microphone socket. Push the connector into the microphone until it clicks.
2. To disconnect the cable and microphone, grasp the connector while depressing the tab.
Pull the connector away from the microphone.
Usage:
1. For the best Gain-before-feedback and isolation
from undesired background noise, aim the
microphone toward the sound source and away
from undesired sound source.
continued on other side
Sound
Source Loudspeakers
Microphone Stage
Monitor