Samsung CX4 - Manual (Page 85)

84
5
Shooting Men
u
Manual
1
Select [Manual] and press the ADJ./OK button.
2
Frame a piece of paper or other white object under the lighting
that will be used in the final photograph and press DISP.
• The white balance is set.
3
Press the ADJ./OK button.
• The symbol appears on the screen.
• The effect of the selected white balance setting can be previewed in
the picture display. Repeat the above steps until the desired effect is
achieved.
Note -------------------------------------------------------------------------------------
To cancel [Manual], select a setting other than [Manual].
ISO Setting
ISO sensitivity indicates how sensitive film is to light. A greater value
means higher sensitivity. High sensitivity is suitable for shooting an
object in a dark place or a fast-moving object while minimizing
blurring. When ISO setting is set to [Auto], the camera automatically
changes the sensitivity according to the distance, brightness, zoom,
macro settings, and picture quality/size. Choose settings other than
[Auto] to fix ISO sensitivity at the selected value.
The upper limit for auto ISO sensitivity can
be selected using the [Maximum ISO for
ISO Auto] in the shooting menu (GP.77).
If ISO sensitivity is assigned to the ADJ./OK
button (GP.46), the upper limit for auto
ISO sensitivity can be chosen by pressing
the DISP. Button when [Auto] is selected.
Note -------------------------------------------------------------------------------------
• When [Auto] is selected for ISO sensitivity, the camera will select an ISO
sensitivity between 100 and the value selected for [Maximum ISO for ISO Auto].
• If the flash is set to [Auto], the flash will fire if optimal exposure can not be
achieved at the sensitivity selected for [Maximum ISO for ISO Auto].
• Images shot with a higher sensitivity may appear grainy.
• When [Auto] is selected for ISO sensitivity, the ISO value displayed when the
shutter release button is pressed halfway may in some instances (for example,
when the flash is used) differ from the value selected when the shutter is released.