Sanyo PID-42AS1 - Manual (Page 21)

21
RS232C COMMAND TABLES
■ Time Read Command Table
Status read command Item
CR PANELH
Status of accumulated lifetime of panel .
(The same as CR_LAMPH Command)
CR MONH
Status of accumulated lifetime of monitor .
(The same as CR_PROJH Command)
■ UK Read Command Table (Basic Command)
Command Item Note
CR0 Power On, Standby, power error,
CR1 Input Mode AV1, AV2, . . . , DVI, PC
CR WIDE Wide mode Auto, Normal, Full, . . .
CR PICTURE Picture mode Dynamic, Standard, . . .
CR SIGNAL Signal existence Signal/No signal
CR CHILD Child lock On/Off
CR PSAVE Power save On/Off
CRTM Panel usage time –––
CR RMC RC inhibition On/Off
CR MDL Model number Model number
■ Error code Table
Error code Note
?
• Receiving the data that cannot be decoded .
• The wrong indication of parameter .
(Wrong figured number, or wrong word is included)
000 Normal receiving . (no error)
102
If the command of out of range is directly entered
valuable parameter .
103
No matching with Hardware .
(Command for optional function which is not
equipped)
201
If the command of “Out of range” is entered by
inclement or decrements by numeric value .
301
While capturing the picture, no execution . Wait and
transmit command again .
402
While PIN code is in operation, no execution .
Wait and transmit command again .
101 The errors not including above .
■ Sound control Read Command Table
Status read command Item
CR VOLUME Status of volume value .
CR MUTE Status of MUTE .
■ Other Read Command Table
Status read command Item
CR STATUS Status of the operation of the monitor .
CR SIGNAL Status of with or without signal .
CR FREEZE Status of Freeze setting .
CR FANLOCK Statuses of fan lock error.
CR TEMP Status of current temperature value .
■ Setting Read Command Table
Status read command Item
CR LANG Status of Language selection .
CR P-MANE Status of Power management setting .
CR TILE Status of Tile mode ON/OFF setting .
CR TILE-HSETS
Status of Tile mode, the number of
Horizontal array .
CR TILE-VSETS
Status of Tile mode, the number of
Vertical array .
CR TILE-HLOCAT
Status of Tile mode, the number of
Horizontal allocation .
CR TILE-VLOCAT
Status of Tile mode the number of Verti-
cal allocation .
CR TILE-BZLHADJ
Status of Tile mode, the width of bezel
(Horizontal) .
CR TILE-BZLVADJ
Status of Tile mode, the width of bezel
(Vertical) .
CR ONPROG Status of On Program information .
CR WINTERMODE Status of Winter mode Information .
CR PANELPROTECT Statuses of Panel protect Information .
CR LEDLIGHT Status of LED light Information .
CR AVAUTOSHUT Status of AV auto shut OFF Information .
CR CHILDLOCK Statuses of Child lock Information.
CR RCINHIBITION Status of RC Inhibit Information .
GB GB