Sanyo PID-42AS1 - Manual (Page 15)

1
OPERATION
PIP/POP Operation
Using this function, you can enjoy a DVI or Network program and an
image (AV1, AV2, AV3 or PC input) at the same time .
Press the ON/OFF button on the Remote Control repeatly to select
PIP1, PIP2, POP or OFF mode .
During the PIP/POP mode, press the Main/Sub Picture Swap but-
ton will switch the location for main and sub picture .
✐ Only the sound on the main picture is heard from the monitor
speaker. The sound on the sub-picture cannot be heard.
✐ The details for PIP/POP operation (eg,location for sub picture or
input source for any picture,etc .), please refer to page 12 .
■ PIP1 mode
■ OFF mode
■ PIP2 mode
■ POP mode
The left picture is main picture, the right picture is sub picture .
GB GB