Sanyo PID-42AS1 - Manual (Page 9)

9
Input
To switch input source from AV1, RGB, AV2, AV3,
PC, DVI or Network mode .
Standby
To switch the monitor on and off . Also see page 10 .
Menu
To enter and exit the main menu, and sub menu .
Wide
To select the screen mode Full, Full All, Zoom
16:9, Title in 16:9, Zoom 14:9, Title in 14:9,
Normal or Natural wide .
Refer to page 14 .
Recall
To display input selection information and the Time
set .
You can also select colour systems in AV1/AV3
mode as follows: AUTO
í PAL í SECAM í
NTSC í NTSC4.43 í PAL M í PAL N .
Auto PC
It can also be automatically adjusted in PC mode
by pressing this button for twice .
Back
Used to return to the previous menu .
Up and Down
To select the next or previous item .
Bass Expander
To get an emphasised bass sound ON or OFF .
TXT/TV
To select Teletext mode .
Main/Sub Picture Swap
To swap Main and Sub picture .
ON/OFF
To switch OFF í PIP(1) í PIP(2) í POP mode
in turn .
Refer to page 15 .
Level Up/Down
To adjust the sound volume level or enter sub
menus .
F/OK
To confirm the initial setting in the menu.
Picture mode selector
Press the 9 button repeatedly to select the fol-
lowing picture mode .
Personal - Personal preference mode .
Standard - Normal viewing mode .
Dynamic - Suitable for brightly lit rooms .
Soft - Low contrast setting
Eco - Suitable for dimly lit rooms and gives a cin-
ema-like effect.
Freeze
To switch picture still on or off .
Green
Press this button for more than 5 seconds, installa-
tion mode will appear .
Remote control
Remote control battery installation
Install two “AA” 1.5 volt batteries so that the “+” and “–” marks on the
batteries match the “+” and “–” marks inside the unit into the remote
control handset .
FOR EU USERS
The symbol mark and recycling systems described below apply to EU
countries and do not apply to countries in other areas of the world .
Your SANYO product is designed and manufactured with high quality
materials and components which can be recycled and/or reused .
The symbol mark means that electrical and electronic equipment,
batteries and accumulators, at their end-of-life, should be disposed of
separately from your household waste .
Note:
If a chemical symbol is printed beneath the symbol mark, this chemi-
cal symbol means that the battery or accumulator contains a heavy
metal at a certain concentration . This will be indicated as follows: Hg:
mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems for used
electrical and electronic equipment, batteries and accumulators .
Please, dispose of them correctly at your local community waste col-
lection/recycling centre .
Please, help us to conserve the environment we live in!
INSTALLATION
Sound Mute
To mute the sound from the speakers.
The sound changes as follows: Normal volume
Mute.
GB GB