SUPER MICRO Computer AOC-USAS-S4I - Manual (Page 18)

4-2
Add-on Card User's Guide
4-3 Installing with Windows
Before beginning locate your Windows Installation CD.
To install the Adaptec RAID controller driver (during Windows installation):
1 Insert the Windows installation CD.
2. Restart the computer.
3. Follow the on-screen instructions to begin the Windows installation. When asked
to install a third-party driver, click F6. If you miss the opportunity to initiate the
F6 command, you must restart the computer.
4 Insert the driver disk, then wait until you are prompted to install a driver.
5 Choose the floppy disk as the source of the driver and then click Enter.
6 When prompted, click Enter to continue.
7 Follow the on-screen instructions to complete OS installation.
8 Continue to Chapter 6: Managing Your Storage Space.
4-4 Installing with Red Hat Linux
This task requires the Red Hat Installation CD to complete this task.
To install the Adaptec RAID controller driver (during Red Hat Linux installation).
1 Insert the Red Hat Installation CD (the first one) and restart the system.
2 At the Welcome screen appears, type linux dd at the Boot: prompt.
4 When prompted, insert the driver disk, then select OK.
5 Linux allows you to set up the specific type of environment you desire. .
6 Install any third party devices and click Done.
7 Follow the on-screen instructions to complete OS installation.
8 Continue to Chapter 6: Managing Your Storage Space.