Samsung CM929B - Manual (Page 9)

9
Operation
Memory Programming
One-Stage Cooking
1
Upon pressing the Program button, the oven will enter the
Program mode. The display will be cleared.
2
Using the Number buttons, enter the program number from 1 to
20.
3
Then, press the Power Level button to select power. By pressing the
Power Level button repeatedly, you can select the power level - HI,
MED, or LO.
4
After selecting the power level, Use the Number buttons to enter
the cooking time. You can set a time from one second to 30
minutes. To set a time over one minute, enter the seconds as well.
For example, to set 10 minutes, enter 1, 0, 0, 0.
5
Press the Program button to complete setting the memory.
The display will show " : 0 " or the present time (If the time is set)
Note: The maximum allowable cooking time is 30 min. If the
time exceeds 30 min, the display will show “E3”. Press the
Stop/Clear button and retry the steps.
Multi-Stage Cooking
1
Upon pressing the Program button, the oven will enter the
Program mode. The display will be cleared.
2
Using the Number buttons, enter the program number from 1 to 20.
3
Then, press the Power Level button to select power. By pressing
the Power Level button repeatedly, you can select the power level
- HI, MED, or LO.
4
Use the Number buttons to enter the cooking time. You can set a
time from one second to 30 minutes. To set a time over one minute,
enter the seconds as well. For example, to set 10 minutes, enter 1,
0, 0, 0.
5
Repeat steps 3 and 4 for stage II or III memory programming.
6
Press the Program button to complete setting the memory. The
display will show “0” or the present time (if the time is set).
Note: The maximum allowable cooking time is 30 min. The sum
of programmed memory stage cooking time must not
exceed 30 min. If the time exceeds 30 min, the display will
show “E3”. Press the Stop/Clear button and retry the
steps.
jt`Y`i†niU”GGwˆŽŒG`GG{œŒš‹ˆ SGu–Œ”‰Œ™GYWSGYWWXGGXWaZZGht