Spracht AURA SOHO CP-2016-003 - Manual (Page 10)

14 15
INSTRUCTIONS FOR REPROGRAMMING THE FLASH
BUTTON FOR INTERNATIONAL USE
Where the Aura SoHo™ Conference Phone is “based”
outside of North America
Changing the region code is not recommended for
end users. This procedure is either completed in
Manufacting prior to shipment, or best done by a
Service Center or trained Technician.
The Aura SoHo™ Conference Phone has a button labeled
FLASH. This is used for three way conference calling. To
enable this function, you call the first party that you want
on the conference call. You then press the FLASH button.
This creates a pause on the line for a specified period of
time, which puts the party on hold and allows you to call
the second party. When the second party is connected,
and you press the FLASH button again, all three parties
are on the line together. It is the specified timing for the
pause which varies by region. Outside of North America,
this region code must be modified in order to make the
three way calling function operational.
Region Codes Number key to enter
North America - region 1 1 (default setting)
Europe - region 2 2
Australia - region 3 3
New Zealand - region 3 3
Japan - region 4 4
China - region 5 5
Asia - region 6 6
South America - region 7 7
Africa - region 8 8
Not Active, TBD - region 9 9
In Region Code programming mode, only the circled keys
are active.
Keypad Function Description
FLASH button - Start the reprogramming process
HOLD button - End the reprogramming process
Number keys 1-9 - Region codes 1-9
Reprogramming Procedure
1. With the Aura SoHo™ Conference Phone in the On Hook state,
meaning off, press the FLASH button and keep holding it down
for 5 seconds. The keyboard backlight will come on and stay on.
Keep holding the FLASH button for another 5 seconds until the
keyboard backlight begins to flash. Release the FLASH button.
2. Enter the correct region code number based on your location
on the keypad. Only numbers from 1 to 9 will be accepted and
only the last number entered will be stored.
3. Exit the entry process. Press the HOLD button and the new
region code will be stored. If no number has been entered, the
region code will not be changed.
The process times out after 5 minutes. If no data has been entered
in that time, the Aura SoHo™ Conference Phone will automatically
revert to normal operation. No data will be stored.
Flash Button Programming INTERNATIONAL ONLY